High pressure In-Line Filters

These high pressure in-line filters are ideally suited to situations where inline or point-of-use filtration is desired. They withstand high pressures and the stainless wire elements are cleanable for multiple uses. In addition, the paper and fiberglass replacement elements can achieve a very high level of filtration at an extremely low overall cost.

Several materials of construction are available for chemical compatibility with the harshest of solutions. If you are unsure of which materials will be compatible with your fluid, ask us for our expert recommendations.

6IL rated at 5 GPM (suction). 15IL rated at 15 GPM (suction). These filters can also be used for higher return flows. Here higher pressure drops (to 20 PSI) can usually be tolerated and finer micron ratings as possible depending on element pore size, and fluid viscosity. Their sturdy machined-aluminum, steel, or stainless steel housing given them the strength to be pressure rated at 1500 or 3000 psi.

These units are pleated elements made from either stainless steel, wire cloth, or cellulose, with a perforated metal support tube inside. These elements can be easily removed for cleaning or replacement. (They cannot be cleaned by backflushing while in the housing.)

Filter Drawing

6IL 15IL
A 4-15/16 6-5/16
B 1-3/8 2
C 1-5/8 2-3/8
D 1-1/2 2-1/8

How To Order

Example: 6518/15ILA06-238F3

  • 15IL style with Aluminum body rated at 1500 psi
  • 3/4″ NPT connections
  • 238 micron stainless wire element
  • Viton seals
  • U-bracket is not included